Skip to main content

Proteinase K MBG Solution, 20 mg/ml

Applications

  • Protein hydrolysis
  • DNAse and RNase decontamination
  • Protein degradation during the procedures of:
  • Tissue/Cell lysis
  • DNA extraction

Benefits

  • Recombinant broad spectrum, non-specific protease
  • Ready-to-use solution with a very high specific activity
  • Economical and stable for weeks at ambient temperature
  • Robust, works well at a wide variety of reaction conditions: up to 56oC and in a presence of urea, SDS and guanidinium salts
  • Safe – DNase and RNase free to ensure integrity of isolated NA

Proteinase K MBG Solution, 20 mg/ml

Product information "Proteinase K MBG Solution, 20 mg/ml "

Proteinase K (Molecular Biology Grade Solution) is a serine peptidase with a very high specific activity and a broad spectrum of protein digestion possibilities.

The solution is designed to be used for protein degradation (up to tetrapeptides) during the cell lysis and RNA/DNA extraction procedures under hush reaction conditions such as the higher temperatures and the presence of detergents. The enzyme efficiently degrades DNases and RNases during nucleic acid isolation process. The high purity of the Proteinase K and controlled absence of both DNAse and RNase contamination ensures the integrity of nucleic acids.

The 100% enzyme activity (when stored at -20°C) is guaranteed for at least two years after production. However, the experiments proved that the proteinase remains close to 90% active even when stored at +37°C for 18 months.

The enzyme is supplied as a 20 mg/ml concentrated solution with an average specific activity of more than 800 u/ml.

  • Active in all common buffers used for cell lysis and RNA/DNA extraction, in a presence of urea, SDS and guanidinium salts
  • Stable at high temperature of up to 56°C
  • Can be inactivated by heating at 65oC for 20 minutes or at 75oC for 10 minutes
  • Active in a pH range of 4–12 with an optimum pH 7.5–8.0
  • The Proteinase K gene from album expressed in yeast host.
  • The quality limit of allowed host DNA presence is ≤ 0.25 pg/U measured by qPCR what is about a half when compared to other suppliers.

Unit Definition

Folin & Ciocalteu’s method - One unit is required to hydrolyze urea-denaturated hemoglobin producing color equivalent of 1 μmol tyrosine in 1 minute at 37°C and pH 7.5, 1 U = 1 m Anson U.

Related Products

ALLin™ Red Taq Mastermix
highQu ALLin™ Taq DNA Polymerase is the versatile engineered enzyme which in combination with the optimized ALLin™ buffer provides higher success rates in demanding PCR applications like amplification of complex templates, crude sample PCR and fast cycling. ALLin™ Taq DNA Polymerase has the same PCR accuracy like Taq DNA Polymerase, 4.5 x 10^4 (a number of correct nucleotides incorporated before the error occurs) and produces A-tailed products suitable for ligating into TA cloning vectors. The convenience of ALLin™ Taq DNA Polymerase is maximized by the use of 2X Red Mastermix providing the additional advantage of reduced pipetting and minimized errors. ALLin™ Red Taq Mastermix, 2X is premixed with red dye and density reagents for direct loading on the gels after the PCR. In a 2% agarose TAE gel the dye migrates with~350 bp DNA, in 1% agarose TAE gel with ~ 600 bp DNA fragments. The mastermix is even supplied with the PCR Water, and the only thing to add is the template with primers.

Variants from €109.50*
€99.50*
ORA™ qPCR Probe Mix
highQu qPCR master mixes are based on the small molecular inhibitor technology Hot Start PCR allowing to achieve highest sensitivity and specificity under both standard and fast qPCR cycling conditions. They provide excellent results on both AT and GC rich templates, in multiplexing and guaranty rapid extension with early Ct values with minimum or no optimization. Our master mixes are supplied with PCR Water to guaranty the best performance. To suit the broad instrument range the ORA™ qPCR Probe Master mixes are available in three versions – without ROX, with low or high ROX concentration.

Variants from €129.50*
€117.50*
ALLin™ RPH Polymerase
highQu ALLin™ RPH Polymerase (Robust, Proofreading, Hot-start Polymerase) is the versatile engineered enzyme combining best polymerase properties for excellence in most demanding PCR applications, like low copy detection, long or high fidelity PCR, amplification of complex templates, crude sample PCR and multiplexing. ALLin™ RPH Polymerase has 5 times higher fidelity than Taq DNA Polymerase and produces A-tailed products suitable for ligating into TA cloning vectors. For the maximum convenience the ALLin™ RPH Mastermix, 2X is available.

Variants from €219.50*
€199.50*
2X 1Step RT qPCR Probe Kit
Our improved 2X 1Step RT qPCR Probe Kits provide highly sensitive target RNA detection when working with a wide variety of samples. The optimized 1Step RT qPCR Pro Mix in combination with a blend of thermostable Reverse Transcriptase and an advanced RNase Inhibitor (RT-Pro Mix) allows for a single step, one tube RT qPCR with great results even in multiplex reactions. The novel RT-Pro Mix ensures safe and efficient RNA template conversion into a single-stranded cDNA. Pure RNA samples, as well as lysed crude samples can serve as templates for one-step RT qPCR. Though the kit was not specifically designed for crude sample qPCR, it has a potential to work well for this application. The robust 1Step RT qPCR Pro Mix is a 2X concentrated qPCR master mix which includes dNTPs, buffer, and the hot start Taq DNA Polymerase. The Hot Start function ensures the highest sensitivity and specificity under both standard and fast qPCR cycling conditions. The kits provide excellent results on both AT and GC-rich templates and show early Ct values with minimum or no optimization. Our kits include PCR Water to guaranty the best performance. To suit the broad instrument range the 2X 1Step RT qPCR Probe Kits are available in three versions – without ROX, with low or high ROX concentration.

Variants from €247.00*
€224.50*