ALLin™ Isothermal DNA Amplification Kit

Applications

  • Isothermal DNA amplification at elevated temperature
  • Real-time detection of DNA amplification
  • LAMP - loop-mediated isothermal amplification
  • WGA - whole genome amplification

Benefits

  • Efficient 20 minutes DNA amplification at constant 55-70°C temperature
  • ALLin™ format, supplied with water and a dye for fast real-time detection
  • Bst DNA Polymerase with strong strand displacement activity
  • Robust on complex templates and crude samples
  • Low-copy (<5 molecules) targets detection

€197.50*

Product sizes
100 reactions of 25 µl
€197.50*
500 reactions of 25 µl
€841.00*

↑ Collapse variants ↑

Selected Catalog #: IDK0101
Product information "ALLin™ Isothermal DNA Amplification Kit"

ALLin™ Isothermal DNA Amplification Kit enables detection of as little as 5 target DNA molecules in a short time of 20 minutes even without the use of a thermal cycler. The Kit includes a 2X master mix with optimized high-performance buffer, dNTPs and a recombinant Bst Polymerase large fragment having strong 5’ - 3’ strand displacement activity and efficient 5’-3’ polymerase activity working at 55-70°C.

The Polymerase has neither 5’ - 3’ nor 3’ - 5’ exonuclease activity and retains only minor reverse transcription activity. The kit includes PCR water; only templates and primers have to be supplied by the user. Quantitative Fluorescent Dye, 20X is included for an optional use, for a real-time detection in FAM channel on any qPCR cycler.

ALLin™ Isothermal DNA Amplification Kit is a tool of choice for such applications like LAMP, WGA, RAM with an additional advantage of higher temperature reactions, what makes amplification of complex and GC-rich templates more efficient.

Technical characteristics of Bst DNA Polymerase large fragment:

  • Strong 5’ - 3’ strand displacement activity
  • 5’-3’ polymerase activity
  • No 5’ - 3’ exonuclease activity
  • No 3’ - 5’ exonuclease (proofreading) activity
  • Minor reverse transcriptase activity (for RNA, use ALLin™ Isothermal 1Step RNA Amplification Kit (#IRK0101) which includes RTase)
  • Optimal amplification temperature is 65°C.
  • Working temperature range is 55-70°C.
  • Optimal reaction time is 20 minutes, if needed, the reaction can be performed 30 to 60 minutes.
  • The enzyme is inactivated in 10 minutes at 80°C.
  • Quantitative Fluorescent Dye has the excitation max. at 482 nm and emission max. at 512 nm.

The use of this product in certain applications may be covered by patents. The user has to analyse all applicable Limited Use Label Licenses and may need licensing for certain cases.

Related Products

StainIN™ GREEN Nucleic Acid Stain
StainIN™ GREEN Nucleic Acid Stain is a significantly safer alternative to ethidium bromide. It is same easy to use, 4X as sensitive (under Blue LED) and much more secure. More economical as other green dyes, this stain can be also used and disposed with less environmental and health concerns compared to ethidium bromide. It is a fluorescent dye that allows detection of >0,1 ng of DNA in both agarose and polyacrylamide gels. It binds to both dsDNA, ssDNA and RNA and emits green fluorescence when bound to DNA and red fluorescence when bound to RNA detectable under the UV or Blue light and documented with same filters as similar green dyes. StainIN™ GREEN is ideal for DNA extraction from gels for cloning. Smaller than ethidium bromide carcinogenicity has been proved by Ames-test. Mammalian cell mutagenicity tests, both mouse marrow erythrocyte micronucleus and spermatocyte chromosomal aberration tests gave negative mutagenicity results. Carcinogenicity and toxicity of the widely used Ethidium Bromide (EtBr) is one of the biggest safety and environmental problems in the labs where gel electrophoresis is a daily routine. The less toxic nucleic acid dyes address this problem and minimize concerns. The StainIN™ GREEN (SYBR Green-like stains alternative), (SYBR® Green is a registered trade mark of Molecular Probes Inc.) and StainIN™ eco-RED Nucleic Acid Stains by highQu provide a much less-carcinogenic, significantly safer alternative to EtBr while delivering even several times higher detection sensitivity. Same like EtBr, these stains are used during the process of electrophoresis in an agarose gel or PAAG and in the electrophoresis running buffer. Nucleic acid stains are typically divided into two groups – they are either intercalating dyes or minor groove binders. The StainIN™ GREEN and StainIN™ eco-RED Nucleic Acid Stains belong to the group of intercalating dyes that bind to NA and produce the fluorescence signal. Same like many other suppliers of similar products, highQu retains the right to keep the precise chemical information undisclosed and proprietary. The StainIN™ GREEN Nucleic Acid Stain as well as the StainIN™ eco-RED Nucleic Acid Stain are both supplied in water. Detailed safety information is available in MSDS sheets of the stains. Despite proven less mutagenicity, all nucleic acid stains, including SYBR® Green or other shall be handled with care. Used electrophoresis buffer with a stain as well as melted gels shall be run through approved (carbon) filters. If the absence of residual fluorescence is confirmed, the liquids can be disposed with plenty of water down the drain. Alternatively, all used liquids can be autoclaved as the StainIN™ GREEN and StainIN™ eco-RED Nucleic Acid Stains degrade during the long exposure to above 100ºC temperature. The safety office shall be consulted periodically to match local regulations, as they vary and change.    

Variants from €108.00*
€98.00*
ALLin™ HS Red Taq Mastermix
highQu ALLin™ Hot Start Taq DNA Polymerase is the superior sensitive enzyme. The activity at room temperature is blocked by small molecular inhibitor. Enzyme becomes active only after heating what allows for highly specific and extremely sensitive amplification, no primer dimer formation and no background. In combination with the optimized ALLin™ buffer enzyme provides higher success rates in demanding PCR applications like amplification of crude, complex or longer templates and fast cycling. ALLin™ Hot Start Taq DNA Polymerase has the same PCR accuracy like Taq DNA Polymerase, 4.5 x 10^4 (nucleotides incorporated before the error occurs) and produces A-tailed products suitable for ligating into TA cloning vectors. The convenience of ALLin™ Hot Start Taq DNA Polymerase is maximized by the use of 2X Red colored Mastermix providing the additional advantage of reduced pipetting and minimized errors. The mastermix is even supplied with PCR Water, and the only thing to add is the template with primers. ALLin™ HS Red Taq Mastermix, 2X is premixed with red dye and density reagents for direct loading on the gels after the PCR. In a 2% agarose TAE gel the dye migrates with~350 bp DNA, in 1% agarose TAE gel with ~ 600 bp DNA fragments. ALLin™ HS Red Taq Mastermix, 2X is also a key component in highQu SampleIN™ Direct PCR Kit (DPK0101/5), ensuring outstanding PCR results with crude samples.

Variants from €208.50*
€189.50*
Take5™ HR DNA Ladder
highQu ready to use DNA ladders are mixtures of highly purified plasmid digests and PCR products. The high ladder purity allows for exceptional stability and room temperature storage. Ladders are ready to be directly loaded on agarose gels and are supplied with the loading dye solution for probe DNA. They provide sharp bands for DNA sizing and allow for approximate DNA quantification by comparing the amount of DNA of the band similar in size to your sample band.

Variants from €120.50*
€109.50*
100 mM dNTP Set
highQu dNTP sets and mixes meet all highest industry standards and allow for unrivaled performance of your PCR and other DNA synthesis, labeling or sequencing reactions. Produced under the stringent quality monitoring conditions, they guaranty reproducible results. More than 99% HPLC purity eliminates inhibitions of PCR and allows for increased yields with higher dNTP concentrations. Exceptional stability of dNTPs allows for short term ambient temperature shipments, short term room temperature storage or long PCR of more than 30 kb targets, as well as long amplifications exceeding 40 cycles.

Variants from €142.50*
€129.50*